INMO Air3 Flashing Firmware

Luoye2025-10-082026-03-04

This post is password protected

Enter the password to read this post.

❗

I do not represent INMO company, nor am I responsible for any problems caused during this flashing process. If you have no prior experience flashing phones, it is strongly recommended not to do so.

📌

All flashing tools need to be installed and used on a windows system computer.

Install flashing tools and drivers

Note: all three need to be installed

First one👇

Qpst Win 2.7 Installer.zip

Unzip the compressed package and run the QPST.2.7.496.1.exe file within it. Just continue with the default settings during installation.

Second👇

qud.win.1.1_installer_10061.1.zip

Unzip the compressed package and run the QPST.2.7.496.1.exe file within it. Just continue with the default settings during installation.

Third👇

QDLoader HS-USB Driver 64bit Setup.exe.zip

Glasses enter flash mode

Glasses off, long press the volume + and - keys together, insert the USB cable or (after booting, use adb reboot edl to automatically shut down and enter 9008 port), recognize the flashing port 9008.

Note: If none of those work, try pressing and holding the volume up/down and power buttons together for 10 seconds and then releasing them, or try a different data cable, or try a different computer